Solve not working error

Getting not working error while trying to access Netgear Orbi router admin portal. If refused to connect to server. Showing ‘site not found’ or ‘can’t be reach’ error when typing website. Try or default IP gateway to open Orbi router login page. not working error

Netgear Orbi router is a Wi-Fi system that consists of a router and two more satellites that provides high-speed internet to the connected devices. Netgear Orbi router is perfect for the big houses and work spaces. You are required to complete the Orbi router setup to enjoy reliable and better coverage in all the corners of your place.

But is your Orbi router login page won’t connect to server giving not working error? Are you facing Orbi router setup issues? Such situations can be a little frustrating. not working or error- Fixed

However, if you are facing Orbi router problems then, you need not to worry as we can help you resolve them. You can read this guide carefully to resolve the issues easily. There could be many reasons why your Orbi router not working properly. Once you know the cause that is creating an issue with your orbi router, you can easily resolve it.

Here are some reasons that might lead to Orbi WiFi not working issue. Let’s go through them:

  • The connectivity from modem is disturbed
  • Internet is disconnected
  • Modem is over-heated
  • Firmware is not update

Resolve Orbi Login Page Not Opening Issue

Now, let’s dive into the troubleshooting tips to resolve orbi router not working issue.

How to fix Orbi router problems?

Don’t worry if it happens, just follow the troubleshooting tips and get rid of the issue as soon as possible.

  1. Make sure the Orbi router is properly connected to the working power supply.
  2. Check the connection between Orbi router and modem. If the connectivity from modem is disturbed, you will not be able to access Orbi login page.
  3. Make sure the internet port of the modem is not hardware impacted.
  4. Thereafter, check the internet connectivity. Try connecting your Wi-Fi device to the modem directly and check if you are able to access internet. If not, you need to contact your ISP.
  5. Next, you need to try Orbi router firmware update. Update the firmware of your router to its latest version.
  6. Finally, you need to reset your Orbi router to its default settings by pressing and holding the reset button for about 20 seconds.

Also read about: Orbi Firmware Update Failure Issues and Steps to resolve

These troubleshooting tips will resolve the Orbi router admin page not opening or not working issues. If you are facing any other orbi router setup issue, you can ask our experts to help you with them.

Our team is expert for resolving the Orbi router problems. Call them on their toll-free number.

Troubleshoot- Netgear Orbilogin Admin Page Not Loading Error

Unable to access default Netgear orbi router admin page i.e or website. Read below mentioned troubleshooting steps to fix orbi router login page not responding issue.

Orbi login refused to connect giving error

Can’t open orbilogin page on your PC or laptop, do not worry. You may see your Orbi login not opening in case you entered a wrong web address or some other credential. In this section, we will discuss what to do if you can’t access Orbi login page.

Let us tell you, this is not a technical glitch, but still you should not attempt to go through some unnecessary troubleshooting steps as you may come across a serious issue.

Important: If Orbi router reject to open or you can reset the factory setting. Refer guide: orbi router reset

Before Connecting Netgear Orbi login Page – Check Basic Requirements

Do ensure these basic requirements to load Netgear or portal
  1. Ensure the orbi router is well connected to your device either, desktop PC or laptop. Doesn’t matter whether it is Windows 7, 8 or 10 As well iOS Mac.
  2. All cable and wires are in perfect condition. 
  • Check wires are loose or broken or not. 
  • If found any loosely connected cable or broken wire, do fix or change ASAP.
  1. Check Placement and position: Do place your Netgear Orbi router, almost above the ground on the shelf. 
  • Keep avoiding any strong wall or any metal surface disturbance.
  1. Scan your device, for any malicious or harmful software installed in it or not.
  • As if any sort of computer virus or malware may cause interruption in connecting or web portal.
  1. Do clear cookies and cache files. As that may be the reason you are unable to load orbilogin page on your PC or desktop computer.
  • Delete all temporary files might help. 
  • Open cmd, and type %temp% and hit enter.

Also, incomplete or improper setting of Orbi router can cause issue while opening orbilogin admin panel. Check guide for setup and installing steps for Setup Orbi router rbk50

After checking all the above mentioned points, it is preferable to reboot your device. If still won’t open or admin portal. Then there is certainly some technical issue. That needs urgent care, proceed further for troubleshooting steps to resolve or site not found on Windows or iOS Mac devices.

Unable to connect with or on Windows 7,8 or 10

Unable to connect with or on Windows 7,8 or 10

In case you won’t open Orbi login page on your desktop computer or laptop of Windows 7, 8 or 10. All you have to do is to follow the instructions as given here.

  • If you see the error on your Windows PC, either you must have entered a wrong default web address or the web browser is faulty.
  • So, if you see the default web address not working, ensure the address you have entered is correct. 
  • The correct web address is and it has to be entered into the address bar of the internet browser.
  • If can’t find Netgear Orbi site, then try to open the orbi admin page via default IP login.
  • In case you still see the error, restart the Orbi wifi system and connect your PC to its wifi network again.
  • This time, attempt to visit the orbilogin page using a new browser, which is up-to-date.

Also, can also refer guide: not working error

Advance Steps For Or Error

Can’t Connect On Mac or iOS Device

Steps for on Mac or iOS are the same as that for for Windows. There is nothing majorly different for Mac or iOS than Windows. Logging in to the Orbi wifi system is very easy and simple on Mac or iOS if you go through the steps carefully. 

Here are the instructions to access on Mac or iOS devices. 

Steps To Access Orbilogin Admin Portal On iOS mobile via Safari Browser

  1. Get your iOS mobile device in your hands and open the Safari browser on it.
  2. Now, enter the web address into the address bar and the page will take you to the Orbil login page where you will be asked to provide necessary login credentials.
  3. Enter the username and password of your Orbi wifi system and click on Login to log into the device easily.
  4. If you are able to see the Orbi wifi homepage on your mobile screen, it means you have successfully signed into the Orbi device.

Steps for orbi router login page on Mac PC for compatible browser

  1. First of all, go to your Mac computer and pull up any or your favorite browser on it.
  2. At the top of the browser, you will see an address bar. 
  3. Enter the default address or into the address bar. Or Try orbi default IP gateway.
  4. You will be redirected to the Orbi router admin login page on Mac computer.
  5. Provide necessary credentials on the page and get inside your Orbi wifi system easily.

2. Default Orbi Login IP Refused To Connect

Is the default login page disconnecting every now and again on your PC? Do not worry!  If the default page refused to connect, follow the instructions given below;

  • If the default window doesn’t not open on your PC or laptop, please restart the device first.
  • Now, ensure that the PC or laptop that you are using is connected to the wifi network of the Orbi device.
  • Open a web browser and enter into the address bar. Make sure you do not enter this address into the search bar.
  • By now, you should see the homepage on your screen. 
  • If you are unable to see the page, you can use another method too for the login process.
  • Enter the default web address or into the address bar. The address will take you to the login page.

3. or keep disconnecting on Android 

Can’t open on Android device? Here is a quick guide to help you with that. or keep disconnecting on Android or refused to connect and disconnected
  • Uninstall the Orbi app from your Android device and reinstall it.
  • Update latest version of Orbi app on your device, and do check for for firmware too. visit here
  • Now, when you are about to log into the device, use correct credentials to log into it.
  • If you still can’t open on Android or won’t open on an Android mobile application. 
  • Restart the Orbi wifi system and attempt again to log into the device.

So, here are the best possible solutions to resolve not working or error. Try these first and if you need advanced orbi login troubleshooting do feel to contact orbilogin experts at 1-877-818-8843 or chat us.

  1. By clicking on the browser’s icon on your desktop, you can navigate to the preferred internet browser. It is important to remember that the users are only using devices that are already linked to the Netgear Orbi router.
  2. Mention the URL address in the location bar. Using the Enter key on your keyboard, select the search or go option.
  3. As a result, the Login dashboard will show up on the window screen. In the appropriate areas, enter the Orbi admin username and password.
  5. Once you’ve accepted all of the licensing agreement’s terms and conditions. Then proceed to the next step by pressing the Next button.
  6. Check your device’s internet connectivity now.
  7. When the user will receive the notification of confirmation. Select the Orbi satellite option from the drop-down menu.
  1. Connect your Netgear Orbi router to a power outlet and wait for the power LED light to turn solid green.
  2.  Verify that the user’s client device is correctly connected to the orbilogin router’s wireless network or the orbi router’s LAN port.
  3.  Use the default internet protocol address of the available Netgear Orbi router to access the Orbi router login page or use the default internet protocol address of the available Netgear Orbi router.
  4.  In addition, if the user has modified the Orbi Router’s default internet protocol address, utilize the new IP address instead of the default IP address.
  1. Locate the RESET button on your Orbi Router while it is powered on.
  2. It’s usually mounted on the router’s backside or beneath it.
  3. The location of the RESET button varies among the many versions on the market.
  4. If you’re having difficulties finding the RESET button, see the manual that came with the Orbi Router for assistance.
  5. When you’ve discovered it, use a stronger paper clip or something similar to press the button.
  6. Continue pressing it for 10 seconds, or until you hear a beep or the LED goes Amber.
  7. The gadget has now been RESET. Make sure the Orbi Router is turned on when you do this.